Home Blog Page 2

Aligned Dimension Use In The AutoCAD Showing With Image And Video

0

Aligned Dimension Use In The AutoCAD 2014, 2016 & 2017 ……

Many times users need to give dimension on angular lines. Which is not possible by linear dimension. Users can give aligned dimension on objects by using aligned dimension in AutoCAD. There is aligned command in AutoCAD. The aligned command uses to give on those lines which are not horizontally or vertically. Users use the aligned command to give dimension on angular lines in AutoCAD.

How to give aligned dimension in the AutoCAD.

1. Type ALI in the command line and press enter or users can take aligned dimension command from the dimensions toolbar as well as shown in pic-1.

pic-1

2. Select the first point of the line as shown in pic-2.

pic-2

3. Select the second point of the line as shown in pic-3.

pic-3

4. After selection of both point of the line, take the cursor upside and press click to give aligned dimension as shown in pic-4.

pic-4

Video ……

Users may also watch the below video for the guide, how to give aligned dimension in AutoCAD.

How To Give Dimension An Object In AutoCAD Showing With Image And Video

0

How To Create Liner Dimension In AutoCAD 2014, 2016 and 2017 ……

Users always need to show parameters in the drawings for execution of that object. The parameters could be horizontal, vertically and etc. There is dimension toolbar in AutoCAD. Users use the dimension toolbar to give the dimension of the objects. There are approximately twenty commands in dimensions toolbar. One of them is Liner command. Which is used to give dimensions horizontally and vertically in the drawing.

How to work with Liner dimension in AutoCAD.

1. Type DLI in the command line and press enter or take liner command from dimension toolbar as shown in pic-1.

pic-1

2. Select the first point of the object as shown in pic-2.

pic-2

3. Select the second point of the object as shown in pic-3.

pic-3

4. Take the cursor upside and click on the screen as shown in pic-4.

pic-4

Video ……

Users may also watch the below video for the guide, how to give dimension horizontally and vertically in the AutoCAD.

Fillet Command Use In AutoCAD Showing With Image And Video

0

How To Use The Fillet Command In AutoCAD 2014, 2016 & 2017 ……

Many times users need to make a round corner of an object. Users can make round corner of an object by using fillet command in AutoCAD. Fillet command may use on the rectangle, square and closed objects. chamfer command also uses to trim the objects as well. Users can trim the objects by using the Fillet command.

The Fillet Command Use In AutoCAD.

1. Type in the command line and press enter or users may take command from modify toolbar as shown in pic-1.

pic-1

2. Type R in the command line and press enter.

3. Specify the fillet radius as shown in pic-2.

pic-2

4. Specify the first line as shown in pic-3.

pic-3

5. Specify the second line as shown in pic-4.

pic-4

I have given a radius at the corner of an object as shown in pic-5.

pic-5

Video ……

Users may watch the below video for the guide, how to use the fillet command in AutoCAD.

Chamfer Command Use In AutoCAD Showing With Image And Video

0

Chamfer Command Use In AutoCAD 2016 & 2017 ……

Many times users need to cut corners of an object at an angle or distance in AutoCAD. For example, Users may cut the corner of an object by using chamfer command. Chamfer command may use on the rectangle, square and closed objects. chamfer command also uses to trim the objects as well. Users can trim the objects by using the Chamfer command.

How to use the chamfer command in AutoCAD.

1. Type CHA in the command line and press enter or users may take command from modify toolbar as shown in pic-1.

pic-1

2. Type D in the command line and press enter.

3. Specify the first distance for the chamfer as shown in pic-2.

pic-2

4. Specify the second distance for the chamfer as shown in pic-3.

pic-3

5. Specify the first line as shown in pic-4.

pic-4

6. Specify the second line as shown in pic-5.

pic-5

Video ……

Users may watch the below video for the guide, how to use chamfer command in AutoCAD.

Join The Line In AutoCAD Showing With Image And Video

0

Join The Two Line In AutoCAD ……

Many times users need to combine the two line in AutoCAD. For example, there is two line which is inline but not a single line or entity. Users want to make a single line or entity for any reason. Users can make a single line or single entity by using join command in AutoCAD.

How to join the line together in AutoCAD.

1. Type in the command line and press enter or take join command from modify toolbar as shown in pic-1.

pic-1

2. Select the source object or multiple objects to join at once as shown in pic-2.

pic-2

3. Select the object which needs to join and press enter as shown in pic-3.

pic-3

Cut The Line Between Two Specific Points in AutoCAD Showing With Image And Video

0

Cut The Line Between Two Specific Points in AutoCAD ……

Many times users need to cut the line between two specific points in AutoCAD. Often users use the trim command to make space between two points There is break command in AutoCAD. Users may cut the line between two specific points by using break command. Users can also create space by using break command.

1. Type BR in the command line and press enter or take break command from modify toolbar as shown in pic-1.

pic-1

2. Select the first point on the line as shown in pic-2.

pic-2

3. Specify the second point on the line as shown in pic-3.

pic-3

Break The Line At Specific Point In AutoCAD Showing With Image And Video

0

Break The Line At Specific Point In AutoCAD ……

Many times users need to break the line in AutoCAD. For example, there is two line in which is intersecting each with other & users want to break the line at a specific point. There is two type of break command in AutoCAD. One of them can Break the line at a point. Users can break line, polyline & closed objects except for the circle in AutoCAD.

1. Take command from modify toolbar as shown in pic-1.

pic-1

2. Select the object which needs to be the break at the point as shown in pic-2.

pic-2

3. Specify the first break point as shown in pic-3.

pic-3

Video ……

Users may watch the below video for the guide, how to break the line at specific point in AutoCAD.

How to use of extend command in AutoCAD Showing With Image And Video

0

How to extend the line in AutoCAD ……

Many times users need to connect the line to other objects in AutoCAD. Extend command helps us to connect one line to another line.

How to use extend command.

1. Type EX in the command line & press enter or take extend command from modify toolbar as shown in pic-1.

pic-1

2. Select the object & press enter pic-2. where the need to connect line as shown in

Note:- users need to select that object where the need to connect the line.

pic-2

3. Select the object which needs to extend to another line as shown in pic-3.

Note:- Users may extend single object or may select the all objects by crossing window to extend.

pic-3

Video ……

Users may watch the below video for the guide, how to extend the line in AutoCAD.

How To Remove Or Trim Extra Line In AutoCAD Showing With Image And Video

0

Trim all object by the window in AutoCAD ……

Many times users need to remove, delete & trim extra extended line in AutoCAD. Users can trim object such as line, polyline, circle & etc in AutoCAD by using Trim command.

Delete or remove line by using Trim Command

1. Type TR in the command line & press enter or users can take command from modify toolbar as shown in pic-1.

pic-1

2. Select that object & press enter where from the extended line has to be trim as shown in pic-2.

pic-2

3. Users need to Make the Crossing window for trim all object as shown in pic-3 or may select one single object to trim.

pic-3

4. Users can see all selected objects are trimmed as shown in pic-4.

pic-4

Video ……

Users may also watch the below video for the guide, how to delete, remove & trim extra objects in AutoCAD.

Stretch The Object In AutoCAD Or Change The Dimension Of The Object Showing With Image And Video

0

How to use the Stretch command in AutoCAD ……

Many times users need to change the dimension of the object in AutoCAD. For example, users need to change the dimension of square, rectangle or line. Users do not need to make again the object. Users can stretch the object by using the stretch command in AutoCAD. Users need to select half portion of the object while using the stretch command in AutoCAD. If users select complete portion of the object. Stretch command will behavior like move command. So users need to take care

Stretch command or Change the dimension of the object.

1. Type S in the command line & press enter or take command from modify toolbar as shown in pic-1.

2. Select the object.

pic-1

3. Specify the opposite corner of the object as shown in pic-2.

pic-2

4. Specify the base point of the object as shown in pic-3.

Note:- Users may also give base point anywhere on the screen or on the object.

pic-3

5. Specify the second point of the object as shown in pic-4.

Note:- Users may give the second point anywhere on the screen or may give any dimension. For example, if users want to change the dimension from 500 to 800. Put 300 in the command line & press enter to get 800 figure of the object.

pic-4

Video ……

Users may also watch the below video for the guide, how to stretch the object in AutoCAD.